#7639
Brian H
Participant

zapkitty wrote:

If I understand correctly, a charged particle beam is created by the fusion reaction in the plasmoid. The beam will exit the pinch and be directed to the solenoid, which converts the concentrated energy into electricity. I presume this will be hot, as with a lightning strike? And it will be focused into a beam which would mean a small surface area will be impacted. Can it be absorbed without damage to the solenoid, long term?

?…

I’d assumed that the power takeoff for the alpha particles would be via pass-through coils and thus no physical impact with anything until the helium ions had been slowed way down by those coils?

As this is a very predictable beam one doesn’t need plates scattered across the interior of the containment volume ala a polywell and thus no need for impacts.

It’s the electron beam heading in the opposite direction that would pose a threat to equipment.
Yes, the alpha (helium pos-ions) just passes through the coil tube (solenoid) on its way to the catchment chamber, being slowed and inducing current as it goes. It is neutralized in the chamber, leaving ordinary He4 gas.

The electron beam, as mentioned above, will be stopped/contained by the plasmoid itself according to Eric.